Escape Sequence Commands - Multitech MultiModem ZBA Series At Commands Reference Manual

Command: #CBSn Callback Enable/Disable
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command: #Sx
Values:
Default:
Description:
Command:
Values:
Default:
Description:

Escape Sequence Commands

Command:
Values:
Description:
Command:
Values:
Description:
Multi-Tech Systems, Inc. AT Commands for the MT5634 Family of Products (S000272J)
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
n = 0, 1, 2, or 3
0
#CBS0 Disables callback security.
#CBS1 Enables local and remote callback security.
#CBS2 Enables remote callback security only.
#CBS3 Disables callback security until local hangup or reset.
#CBS4 Enables a callback security modem to originate a call without a connection
password prompt.
#Pn Set 11-bit Parity
n = 0 or 1
2
#P0 No parity.
#P1 Odd parity.
#P2 Even parity.
Enter Setup Password
x= password (1–8 characters, case sensitive)
MTSMODEM
Enters the callback security setup password.
#S=x Store Setup Password
x= password (1–8 characters, case sensitive)
MTSMODEM
Stores a new callback security and remote configuration setup password.
Escape Sequence+++AT<CR> Escape Sequence
n/a
Puts the modem in command mode (and optionally issues a command) while
remaining online. Type +++AT and up to six command characters, then press ENTER.
Used mostly to issue the hang-up command: +++ATH<CR>.
Escape Configuration for Remote Configuration%%%ATMTSMODEM<CR>
Remote Configuration Escape Sequence
n/a
Initiates remote configuration mode while online with remote modem. The remote
configuration escape character (%) is defined in register S9.
Chapter 1 – AT Commands
23