Chapter 6
Using the Recovery Diskette
Remove the switch's front bezel. Insert the recovery diskette into the drive and
press the Reset button on the back of the switch. This supplies the switch with a
minimal configuration utility that allows you to view the switch from a Web
browser.
At your Web browser, enter the management IP address of your switch. The
Recovery Diskette display shown in
•
•
•
•
•
•
Restore the factory default configuration or the backup configuration.
Reformat the switch's hard disk.
Apply a new software version to the switch.
Perform file maintenance.
View the Event log.
Restart the system.
Figure 19
appears, which allows you to:
Installing the Contivity 4600
65