T1 Csu/Dsu Wan Interface; Figure 6 T1 Csu/Dsu Interface - Nortel Contivity 4600 Installing
Hide thumbs
Also See for Contivity 4600:
- Owner's manual (16 pages) ,
- Install manual (218 pages) ,
- Installing (158 pages)
Table of Contents
Advertisement
34 Chapter 2 Cabling the Switch
T1 CSU/DSU WAN interface
This cable has 8-pin male connectors on each end. The T1 CSU/DSU WAN
crossover cable crosses the blue wire pair with the orange wire pair. This is
different from the commonly available crossover cable used for 10BaseT, which
crosses the green wire pair with the orange wire pair.
Figure 6
Figure 6 T1 CSU/DSU interface
LED 4, Red
LED 3, Green
311641-A Rev 00
Note: The T1 CSU/DSU WAN interface cable is not supplied by Nortel
Networks.
shows the T1 CSU/DSU interface.
LED 2, Blue
LED 1, Yellow
CS160012A
Advertisement
Table of Contents
