Table of Contents
Advertisement
2.1
Inspection Steps
When you receive Video Matrix Platform, please inspect it according to the following steps.
Step 1
Inspect whether there are obvious damages on its appearance.
The material of product package should be able to protect the product from most
impacts during transportation.
Step 2
Open the external package, and check whether any part of accessories is missing.
You may refer to accompanied accessory bag. After you have checked that all
parts are included, you may remove protective film on the device.
Step 3
Open device case to inspect data cable and power cable of front panel, and see if
the connection between main control panel and interface board is loose. Inspect
whether main control panel, control panel and function card are inserted tightly.
One label at the side of the case owns serial number and other information of the device,
which shall be provided when dialing after-sales calls. This label shall be protected well,
and shall not be torn or discarded; otherwise, we may not be able to provide effective
service.
2.2
Accompanied Assessory Bag
Accompanied assessory bag includes user's manual, disk and certificate of quality. When
you unpackage the product, please make sure that all contents match the checklist.
2.3
Device Installation
2.3.1 Preparation of Installation Environment
As a system-level monitoring device, Video Matrix Platform is usually used in central
machine room of monitoring system. Its installation site shall meet national and local
machine room construction standards.
Video Matrix Platform is a standard rack-mounted device fixed in a cabinet. Please pay
attention to the following points during installation and use:
Ensure that the cabinet is sufficiently firm to support Video Matrix Platform and
accessories. During installation, avoid dangers resulting from uneven mechanical load.
Ensure that A/V cable owns sufficient installation space. Bending radius of cables shall
not be less than 5 times as many as their outer diameter.
2
Device Installation
Device Installation 19
Advertisement
Table of Contents
