Table of Contents
Advertisement
4.5
Setup
4.5.1 System Config
On this interface, you can complete general setting, user management, config backup, auto
maintenance, system upgrade, picture management, fan control, PTZ control, comm setup,
safe management and storage path.
4.5.1.1 General
You can configure basic information of the device, such as device information and system date.
4.5.1.1.1 Setting of General Information
Set device name, no. and so on.
Step 1
Select Setup > System Config > General > General.
The General interface is displayed. See Figure 4-38.
Step 2
Configure parameters. See Table 4-8.
Parameter
Device Name
Device No.
Language
Step 3
Click OK.
4.5.1.1.2 Date
You can configure the system date, and choose to enable NTP (Network Time Protocol) or not.
After enabling NTP function, device can automatically synchronize time with the NTP server.
Step 1
Select Setup > System Config > General > Date.
The Date interface is displayed. See Figure 4-39.
Figure 4-38
Table 4-8 General parameters description
Description
Set device name.
Set device No..
System language is determined by program package.
General
Web Operation 62
Advertisement
Table of Contents
