Connect Sensor To Patch - ZOLL Arrhythmia Management System Instruction Manual

4

Connect Sensor to Patch

Tabs
1.
Hold Sensor so the
tabs are on the
bottom.
3.
Tilt and insert the
lower part of Sensor
with the tabs into the
bottom of Patch frame.
4.
Press Sensor onto
Patch until you hear/
feel it snap in place.
Page 17
Part 2: Getting Started
2.
Hold Patch so that
the ZOLL logo is at
the top.
5.
Sensor should be
firmly attached to
Patch.