Toshiba RAC-PD0812CRRU User Manual page 26

How to Use the Advanced Functions
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don't need
the same temperature settings to stay
comfortable).
Note: The SLEEP function is not
available in FAN or DRY mode.
SWING Function
Used t o stop or start louver movement and set the
desired up/down air flow direction. The louver
angle changes in 6 degree increments with each
press (not all models). By pressing for more than 2
seconds, the louver auto swing feature is activated.
MyTemp function
The MyTemp function enables the remote
control to measure the temperature at its
current location.
When using AUTO, COOL, or HEAT functions,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
1. Press at its button to activate function.
The remote control will send temperature
signal to the unit every three minutes.
2. Press at its button again to turn off
this function.
Page 26
MyTemp
SHORTCUT Function
Used to restore the current settings or resume
previous settings.
Push this button when remote controller is on,
the system will automatically revert back to the
previous settings including operating mode,
setting temperature, fan speed level and sleep
feature (if activated).
By pressing for more than 2 seconds, the
system will automatically store the current
operation settings including operating mode,
setting temperature, fan speed level and sleep
feature (if activated).
User Manual