Toshiba RAC-PD0812CRRU User Manual page 15

Window Installation Kit
Exhaust hose
Unit adaptor Air exhaust
passage
Hook
Hole Seat
Adaptor Lower
groove
Before assembly
Window
Sliders
After assembly
1+2：
Bolt
1+2+3：
Bolt
1+2+3+4：
1+4：
User Manual
Exhaust hose
assembly
Make sure the adaptor
is inserted into the
lower groove of the
air outlet.
Bolt
Bolt
Bolt Bolt
Bolt
1: Preparing the exhaust hose assembly
Press the exhaust hose into the Air exhaust
passanger and unit adaptor, clamp automatically
by elastic buckles of the adaptors.
2: Install the exhaust hose assembly to the
unit
Insert the unit adapter side of the exhaust hose
assembly into the groove of the air outlet on
the back of the unit. Align the hook of the unit
adapter with the seat on the air outlet and slide
the assembly down until seated.
3: Preparing the adjustable window slider
1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two or
more window sliders, use the bolt to fasten
the window sliders once they are adjusted
to the proper length.
Windows Type
Window
slider A
Hung Window
Window
slider A
Sliding Window
Page 15