Grease Lubrication; Optional Accessories - Makita DUH501 Instruction Manual

Grease lubrication

Interval of lubrication: Every 100 operating hours
1. Remove 3 bolts, and then remove the bottom
cover.
► 1. Bolt 2. Bottom cover
2.
Remove the cap from the grease vessel, and then
attach the grease vessel to the hole on the cover by
turning the grease vessel.
1
► 1. Cover 2. Grease vessel
3. Apply the grease to the tool (Approximately 5 g
(0.2 oz) as a guide).
4.
Remove the grease vessel.
5.
Attach the bottom cover, and then tighten 3
screws.
2
1
2
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Shear blade assembly
• Shear blade cover
• Chip receiver
• Grease vessel
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
15 ENGLISH