Lubricating Moving Parts; Drive Axle; Grease Lubrication - Makita EN422MP Instruction Manual

After operation, remove dust from both sides of the
shear blades with a wired brush, wipe it off with a cloth
and then apply low-viscosity oil (machine oil, or spray-
type lubricating oil) to the shear blades.
Fig.30
NOTICE:
Do not wash the shear blades in water.
Doing so may cause rust or damage to the tool.
NOTICE:
Dirt and corrosion cause excessive
blade friction and shorten the operating time per
battery charge.
Storage
Attach the blade cover to the shear blades so that the
blades are not exposed. Store the tool out of the reach
of children. Store the tool in a place not exposed to
moisture or rain.
When storing the attachment separated from the power
unit, put the cap onto the end of the pipe.
Fig.31

Lubricating moving parts

NOTICE:
Follow the instruction of the frequency
and amount of grease supplied. Otherwise insuffi-
cient lubrication may damage moving parts.

Drive axle:

Apply grease (Makita grease N No.2 or equivalent)
every 30 hours of operation.
Fig.32
NOTE: Genuine Makita grease may be purchased
from your local Makita dealer.

Grease lubrication

Interval of lubrication: Every 25 operating hours
1. Remove the bolt from the hole for lubrication.
1
Fig.33
► 1 . Bolt
12 ENGLISH