Cembre MG4 Operation And Maintenance Manual page 9

2 Installation
2.2.5 Connection via Ethernet network
► From the MG4 display, select: Settings  Network
 WiFi settings.
► Click on the edit button and select DHCP.
► Search for a select the desired Wi-Fi network and
enter its password.
► Proceed as described in § 2.2.4.1.
2.2.6 Connection via an Access Point
► From the MG4 display, select: Network  Settings
 WiFi settings
► Activate the button in the top right-hand corner
► Click on the edit button and select ACCESS DHCP.
► Select the SSID network generated by the MG4,
enter the password, or, in "Network Information",
scan the QR code.
► Proceed as described in § 2.2.4.1.
2.2.7 Installing the "GENIUSPRO" operating software
►
The USB flash drive (FD-GENIUSPRO) contains the "GENIUSPRO"
operating software and the drivers necessary for the printer to function.
Any updates to the "GENIUSPRO" software can be downloaded from
the website www.cembre.com.
►
Insert the USB drive into the computer's USB port and proceed with
the installation of "GENIUSPRO" through the SETUP file.
2.2.8 Connection to the "Geniuspro Mobile" app
► Install the "Geniuspro Mobile" app on your Android or iOS mobile device (refer to § 1.1).
► Pair the MG4 to the app via an access point (proceed as described in section 2.2.6) or via a WiFi network.
(proceed as described in § 2.2.5 verifying that the device is also connected to the WiFi
network already connected to the MG4).
► Open the "Geniuspro Mobile" app, click on  ADD PRINTERS.
► Enter in the "Network Information" menu of the MG4 and e scan the QRcode on the display
via the mobile device, pairing the MG4.
MENU
Network
LAN Setting
WiFi Settings
Hostname
Network information
AP
MENU
Network
LAN Setting
WiFi Settings
Hostname
Network information
WiFi......
DHCP
STATIC iP
IP:
SUBNET
MASK:
GATEWAY:
SEARCH
Access Point
DHCP
STATIC iP
SSID:
MG4-20AA001
Password:
00000000
IP:
9
ACCESS POINT
EDIT
ACCESS POINT
EDIT