Cembre MG4 Operation And Maintenance Manual page 15

4 Inserting the material
4.1 Positioning the interface template
To keep the print sheets in the correct position on the loading carriage, the latter must be equipped with a special
interface template (Fig. 8a):
X Choose the interface template most suitable for the product to be printed (Ref. to table A).
X Correctly place the interface template (Fig. 8b) on the mobile carriage so that the two guide pins fit into the corre-
sponding holes under the template.
PRODUCT TO BE MARKED:
MG-TPMF
Cable tags for holders
MG-TPM
Cable tags for holders
MG-TDM
Cable tags without holders
MG-TDMO
Opened Cable tags without holders
MG-ETF
Cable tie-on tags
MG-KMP
Wraparound cable markers
MG-CPM
Terminal marker tags
MG-CPMF
Terminal marker strips
MG-VYB
Terminal marker labels
MG-SPM
Contactor and component markers
MG-TAP
Cable and component legends
MG-PTS
Pushbutton legends
MG-TAPW
Cable and component legends
MG-TAR
Cable and component legends
MG-DOG
Cable and component dog tags
MG-TAA
Adhesive component legends
MG-VYT
Adhesive component labels
MG-VCT
Adhesive component labels
MG-PYT
Adhesive component labels
MG-SAT
Safety labels
MG-PLC
PLC legends
MG-17.5
Modular legends and labels
MG-VRT
Panel plates
MG-SIGNS
Panel legends and labels
Table A
Interface template
MG2-PLT MG2-PWC MG2-QTB
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fig. 8a
Fig. 8b
MG2-PTM MG2-PTD
• •
•
•
•
15