Setting Up A Wireless Network; Access Point Location - Grandstream Networks GWN70 Series User Manual

Tracking IP Address

SETTING UP A WIRELESS NETWORK

The GWN70xx Router provides the user with the capability to create a wireless network either directly from the GWN70xx or by adding multiple
GWN76xx series access points, with connectivity over the most common wireless standards (802.11a/b/g/n/ac/ax) operating in both 2.4GHz
and 5GHz range.
The GWN70xx integrates multiple layers of security including the IEEE 802.1x port-based authentication protocol, Wi-Fi Protected Access
(WPA/WPA2, WPA2, WPA2/WPA3, WPA3, and WPA3-192), and rewall and VPN tunnels.
Discover and Pair GWN76xx Access Points
1. Connect to the GWN70xx Web GUI and go to Access Devices Con guration.
→
2. Click on (Pair AP) to Discover access points within GWN70xx's LAN Network, or click on to pair with slaves
access points whose master has gone o ine.
3. Check the Access points available and then click OK.
Access Devices – Con guration page

Access Point Location

GWN70xx router has an interesting feature to help users to locate different access points using blinking LED, to do so go under the Access
Devices Status page then click on and the corresponding LED will start blinking its LEDs. This can help ease locating the Access points on
→
a multi-deployment site.