Table of Contents
Advertisement
3. Connect all REs to the same wired LAN as the master then perform the normal process of discovery/pairing process, and after successfully
pairing the APs they can be deployed on the eld.
4. REs can also be discovered wirelessly when powered via PSU or PoE Injector, and the admin can con gure them after discovery. This requires
that the REs must be within the range of the Master or CAP Slave's signals coverage.
The following table describes the Mesh con guration settings.
Mesh
Scan Interval (Min)
Interface
Wireless cascades
Upgrading Access Points
Single Access Point Upgrade
If you want to upgrade a single access point or multiple Access points, users need to select the APs and then simply click on the button
to launch the upgrade process, the AP will use the same parameters con gured for the router under the menu
Settings
Upgrade.
→
CLIENTS CONFIGURATION
Clients
Clients page keeps a list of all the devices and users connected currently or previously to different LAN subnets with details such as the MAC
Address, the IP Address, the duration time, and the upload and download information. It's helpful to know about the clients' stats and also who
is consuming more bandwidth. Click on Operations
When checked the Mesh feature will be activated.
The valid range is 1~5. The default value is 5
Only 5GHz can be selected.
The valid range is 1~3. The default value is 3
to edit the device name or limit its maximum upload or download rate.
Mesh
Upgrading APs
System
Advertisement
Table of Contents
