Table of Contents
Advertisement
Mesh Network
In Mesh Network, the wireless connection is established between multiple APs, which is used to pass through data tra c rather than client
association. Each AP will evaluate the performance of wireless channels based on several factors and choose one or multiple appropriate APs
to set up the connection.
In a mesh network, access points are categorized into two types:
CAP (Central Access Point):
○
○
RE (Range Extender):
This is an access point that participates in the mesh network topology and has a wireless uplink connection to the
central network.
To deploy mesh access points (RE), users/installers can follow the below steps:
1. Make sure to have the master and CAP access points already deployed (sometimes the CAP access points can be the master controller of
the network).
2. Next, we need to pair the RE access points to the master. This can be done in two ways:
this is an access point that has an uplink connection to the wired network.
Device Management
Mesh
Advertisement
Table of Contents
