Advertisement
Housing
Stud
Housing
Support
Figure 7a: Pro-475
Housing
Support
Figure 7b: Pro XL-575
Hopper
Bolt and Locknut
(Lower Right)
Locknut
(Lower Left)
Figure 8a: Pro-475
DR
®
12
SELF-FEEDING WOOD CHIPPER
Attaching the Hopper Assembly
Note: We recommend that you have someone help you lift the Hopper in place and
support it until it is secured to the Chipper.
Tools Needed:
•
Two 1/2" Wrenches
For Pro-475 Models:
1.
Remove and discard the three Shipping Nuts from the Housing Bolts, but
leave the Housing Bolts in place (Figure 7a).
Bolts and
Locknuts
2.
Position the Hopper Assembly onto the Housing Support and Stud (Figure
8a) and secure the upper Bolts to the Hopper Assembly with two 5/16-18
Locknuts and Washers.
3.
Secure the lower right Bolt to the Hopper Assembly with a 5/16-18 Locknut
Housing
Studs
(no Washer).
4.
Install a 5/16-18 Locknut and Flat Washer to the lower Housing Stud.
For Pro XL-575 Models:
1.
Remove and discard the Shipping Nut from the Housing Bolt, but leave the
Housing Bolt in place (Figure 7b.)
2.
Position the Hopper Assembly onto the Housing Support and the three
Housing Studs (Figure 8b) and secure the Bolt to the Hopper Assembly
Bolt and
with a 5/16-18 Locknut and Washer.
Locknut
3.
Install three 5/16-18 Locknuts and Flat Washers to the three Studs.
Bolt, Locknut and
Washer (Upper
Left and Right)
Spacer
Chipper
Assembly
Hopper
Locknut and Washer
(Two on other side of
Hopper Also)
Bolt, Locknut
and Washer
Figure 8b: Pro XL-575
Chipper
Assembly
Hide quick links:
Advertisement
