Warning Label Identification; Specifications - Ingersoll-Rand 2934B2SP-EU Instructions Manual

Spark–resistant super duty impactools
Hide thumbs Also See for 2934B2SP-EU:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
WARNING
Always wear eye protection
when operating or perform-
ing maintenance on this
tool.
WARNING
Air powered tools can vibrate
in use. Vibration, repetitive
motions or uncomfortable po-
sitions may be harmful to your
hands and arms. Stop using
any tool if discomfort, tingling
feeling or pain occurs. Seek
medical advice before resum-
ing use.
WARNING
Keep body stance balanced
and firm. Do not overreach
when operating this tool.
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator. We recommend the
following Filter–Lubricator–Regulator Unit:
For International – No. C26–C4–A29
After each forty–eight hours of operation, or as experience
indicates, inject about 4 cc of Ingersoll–Rand No. 100 Grease
into the Grease Fitting.
Model
Type of Grip
2934B2SP–EU
inside trigger
2934B9SP–EU
inside trigger
2940B2SP–EU
inside trigger
H
Tested in accordance with ANSI S5.1–1971 at free speed
Tested to ISO8662–1 loaded with frictionbrake to 9 RPM
ISO3744

WARNING LABEL IDENTIFICATION

90 psig
(6.2bar/620 kPa)
PLACING TOOL IN SERVICE
Ingersoll–Rand No. 100

SPECIFICATIONS

Drive
in.
1" sq. dr.
1" sq. dr.
1" sq. dr.
WARNING
Always wear hearing
protection when operating
this tool.
WARNING
Do not carry the tool by
the hose.
WARNING
Operate at 90 psig (6.2 bar/
620 kPa) Maximum air pressure.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
HSound Level
Impacts
per min.
Pressure
750
97.7
780
96.2
850
91.7
2
WARNING
Always turn off the air sup-
ply and disconnect the air
supply hose before install-
ing, removing or adjusting
any accessory on this tool,
or before performing any
maintenance on this tool.
WARNING
Do not use damaged, frayed
or deteriorated air hoses
and fittings.
International Warning Label:
Order Part No. ___________
FILTER
COMPRESSOR
(Dwg. TPD905–1)
♦Vibrations
dB (A)
•Power
110.7
109.2
104.7
Level
2
m/s
7.0
13.6
13.4

Advertisement

Table of Contents
loading

This manual is also suitable for:

2940b2sp-eu2934b9sp-eu

Table of Contents