Related Manuals for Ingersoll-Rand 2934B2SP-EU
Summary of Contents for Ingersoll-Rand 2934B2SP-EU
- Page 1 04584280 Edition 3 January 2014 Air Impact Wrench Models 2934B2SP-EU, 2934B9SP-EU and 2940B2SP-EU Maintenance Information Save These Instructions...
-
Page 2: Product Safety Information
Lubrication 2. Use Ingersoll Rand No. 10 Oil for lubricating the motor. Inject Each time a Model 2934B2SP-EU, 2934B9SP-EU or 2940B2SP- EU Impactool is disassembled for maintenance and repair or approximately 1 to 2 cc of oil into the Straight Inlet (11) before replacement of parts, lubricate the tool as follows: attaching the air hose. -
Page 3: Assembly Of The Motor
8. Remove the two Air Port Gaskets (27) and Air Port Gasket 2. Using a wrench, unscrew and remove Inlet as well as Air Strainer Retainers (28) from Housing. Screen (12) and valve Spring (10). 3. Remove Throttle Valve Assembly (8) and the Valve Plunger (7) Disassembly of the Handle from Handle. -
Page 4: Assembly Of The Impact Mechanism
Assembly of the Impact Mechanism 5. Set assembled hammer mechanism onto rotor shaft spline. 6. Place Hammer Case Gasket (41) over mechanism and against 1. Coat Hammers (48) with grease and place the two together face of Motor Housing. so that the faces having the partial recess in the central 7. - Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...