Entering A Twinsafe Address And Parameters In The System Manager; Fig. 23 Safe Parameter Tab - Beckhoff EP1908 Operating Instructions Manual

Operation
5.6.3 Entering a TwinSAFE address and parameters in the System
Manager
The TwinSAFE address set at the rotary switch must be entered under the tab Safe Parameters (FSoE
Address entry) below the EP1908-0002. All other parameters can also be set there. They can also be found
under the respective TwinSAFE connection on the tab Safe Parameters.
Fig. 23: Safe Parameter tab
The connection-specific parameters are set in the respective TwinSAFE connection on the Connection tab.
38 Version: 3.0.0 EP1908