Operation; Environmental Conditions; Installation; Safety Instructions - Beckhoff EP1908 Operating Instructions Manual

Operation

5 Operation
5.1

Environmental conditions

Please ensure that the TwinSAFE Boxes are only transported, stored and operated under the specified
conditions (see technical data)!
Risk of injury!
The TwinSAFE EtherCAT boxes must not be used under the following conditions.
• under the influence of ionizing radiation (that exceeds the level of the natural environmental radiation)
• in corrosive environments
Electromagnetic compatibility
The TwinSAFE components comply with the current standards on electromagnetic compatibility with regard
to spurious radiation and immunity to interference in particular.
However, in cases where devices such as mobile phones, radio equipment, transmitters or high-frequency
systems that exceed the interference emissions limits specified in the standards are operated near
TwinSAFE components, the function of the TwinSAFE components may be impaired.
5.2

Installation

5.2.1

Safety instructions

Before installing and commissioning the TwinSAFE components please read the safety instructions in the
foreword of this documentation.
5.2.2

Transport / storage

Use the original packaging in which the components were delivered for transporting and storing the
TwinSAFE components.
Note the specified environmental conditions
Please ensure that the digital TwinSAFE components are only transported and stored under the specified
environmental conditions (see technical data).
20
WARNING
NOTE
CAUTION
Version: 3.0.0 EP1908