ADJ ENCORE PROFILE MINI COLOR User Manual page 10

I N S T A L L A T I O N
CLAMP INSTALLATION
This fixture features a mounting point on the yoke for the attachment of a mounting clamp. There is
also a safety cable loop located on the rear of the fixture above the DMX ports (see the illustration
below). When mounting the fixture to a truss or any other suspended or overhead installation, be sure
to secure an appropriately rated clamp (not included) to the yoke, and attach a separate SAFETY
CABLE of the appropriate weight rating to the safety cable loop. If the barrel and/or barndoor acces-
sories are attached, each accessory must also be secured using its own appropriately rated safety
cable, securely and independently looped around the fixture's mounting yoke as shown in the illustra-
tion below. Please refer to the Accessory Installation section of this manual for detailed information
regarding the installation process for these accessories.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS. WHEN BARREL AND/OR BARNDOORS ARE INSTALLED, EACH
ACCESSORY MUST ALSO BE FITTED WITH ITS OWN SEPARATE SAFETY CABLE.
MOUNTING
CLAMP
BARREL
SAFETY
CABLE
LOOP
BARNDOOR
SAFETY
CABLE
LOOP
SAFETY CABLES
FOR ACCESSORIES
LOOPED AROUND
YOKE
SAFETY CABLE:
10
FIXTURE
SAFETY
CABLE
LOOP