Description Of Lcd Annunciators; Inserting & Removing The Rubber Boot/Stand - LaMotte pH 5 PLUS Manual

Find Quality Products Online at:

2.2 Description of LCD Annunciators

The large custom LCD consists of 3½-digit segments which uses
annunciators for pH or °C (Temperature). Other annunciators include
HO (when HOLD function is activated) and LO (low battery
condition).
2.3 Inserting & Removing the Rubber Boot/Stand
1. To remove the meter from the rubber boot, push out the bottom
edge of the meter until it is completely out of the boot. Ensure
that the probe cables are not connected. See Figure 1.
2. To insert the meter into the rubber boot, slide in the top of the
meter before pushing the bottom edge of the meter down to set it
into position. Lift up the stand at the back of the meter for bench
top applications. Figure 2.
GlobalTestSupply
www.
6
.com
sales@GlobalTestSupply.com