CONNECTING THE POWER CORD
When connecting the power cord, take heed of the information given
in
"Safety precautions" on page
1.
Ensure that the
printer power
switch is in the < >
position.
2.
Connect the power
cord to the power
cord connector at
the back of the
printer. Connect the
other end of the
power cord to the
power outlet.
3.
Press the power
switch of the
printer to the < >
position.
The power will be
applied and the
control panel will
display that the
printer is ready to
print.
>
Depending on the network environment used, it may take some
minutes before the printer is ready for printing.
>
If the message that the printer is ready to print but is unable to
retrieve an IP Address is displayed, continue operating as normal.
NOTE
INSTALLATION AND RELOCATION PROCEDURE > 39
9.