Oki B6200 Series User Manual page 31

4. Connect the cable of the hard disk to the connector on the
printer as shown in the diagram.
When connecting the cable, hold the disk firmly by hand to prevent it
from dropping.
5. Hold the hard disk as shown in the diagram, and install it in
the printer. Align the arrow on the hard disk with the arrow on
the printer, and insert the bracket at the top of the disk into
the install position.
6. Tighten the screws on both sides of the hard disk.
7. Refer to
CAUTION!
"Closing the printer" on page
INSTALLATION AND RELOCATION PROCEDURE > 31
27.