1 – Powerview Gauge
2 – Emergency operating instructions
3 – Automatic / Manual Mode Selector Switch
4 – Manual Crank Controls
15.2.3.3 Adjustments
There are no field adjustments; other than fine
tuning the throttle adjustment when setting the
engine rated speed with pump operating at
rated flow (Section 3.6 of this manual).
Figure #28 – Clarke Instrument Panel
58
5 – Warning Light
6 – VSPLC / VSSLC wiring harness
7 – Manual Stop
15.3 ENGINE SYSTEMS
15.3.1 Electrical System
15.3.1.1 Wiring Diagram
Refer to Figure #29 for the wiring diagram
that shows the additional circuits added to
a PLD equipped engine.
standard engine wiring diagram refer to the
"SERVICE" tab at www.clarkefire.com.
Note, for the