Page 1
360KG STEEL MESH FOLDING RAMP MODEL NO: CFSR360 PART NO: 7610198 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS1219 ISS 1...
Page 2
INTRODUCTION The CLARKE CFSR360 Steel Mesh Folding Ramp provides a safe and simple solution to loading and unloading in-line narrow vehicles, wheelbarrows or bikes from vans or trailers. This ramp also includes an adjustable strap with hook to ensure the ramp is secure when loading or unloading.
Page 3
SAFETY PRECAUTIONS WARNING: TO AVOID PERSONAL INJURY AND/OR PROPERTY DAMAGE, PLEASE READ AND FOLLOW ALL OF THESE INSTRUCTIONS BEFORE USE. 1. Never overload the ramps. Maximum capacity for your ramp is 800 lbs (360kg) per ramp; 1600 lbs (720 kg) per pair (all loads must be evenly distributed).
Page 4
SETTING UP 1. Make sure you are loading on a hard, level surface. 2. Turn the engine off, place the vehicle in gear and set the hand brake on. FITTING THE SECURING STRAP TO THE RAMP 1. Unfold and lay the ramp upside down.
Page 5
SECURING THE RAMP 5. Secure the ramp to the vehicle using the hook on the second strap. 6. Tighten the strap. • After the strap is secure, test the ramp by pulling backwards. Make sure it does not slide back or disengage from the loading surface of the vehicle.
Page 6
SPECIFICATIONS Model Number CFSR360 Maximum Load 800lb / 360 kg Extended Dimensions (L x W x H) 2054 x 280 x 41 mm Folded Dimensions (L x W x H) 1055 x 280 x 101 mm Maximum Recommended Height Of The Tailgate 30 inches (76 cm) Weight 11.5 kg...
Page 7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the Strong-Arm CFSR360 and is the answer not in the manual?
Questions and answers