Subscribe to Our Youtube Channel
Related Manuals for Clarke CSBCT
Summary of Contents for Clarke CSBCT
- Page 1 SODA BLAST CONVERSION KIT MODEL NO: CSBCT PART NO: 7640131 OPERATION & MAINTENANCE INSTRUCTIONS LS0314...
- Page 2 In doing so you can look forward to your purchase giving you long and satisfactory service. RECOMMENDED USE Soda blasting accessory for use in conjunction with the Clarke CPSB100 and CPSB200 sandblasters. Soda blasting is especially suitable in the classic car market as soda will not etch glass and will not warp or remove metalwork.
- Page 3 THE UNIT AND WILL INVALIDATE YOUR WARRANTY WARNING: WEAR APPROVED EAR, EYE, HAND AND RESPIRATORY PROTECTION WHEN OPERATING THE BLASTER. A FULL RANGE OF PERSONAL SAFETY EQUIPMENT IS AVAILABLE FROM YOUR CLARKE DEALER • Spillages of abrasive material, which may be slippery, must be cleaned up immediately to avoid injury.
- Page 4 ASSEMBLY WARNING: BEFORE OPERATING THE UNIT ENSURE YOU READ, UNDERSTAND AND APPLY ALL SAFETY INSTRUCTIONS. REMOVE THE STANDARD MANIFOLD 1. Loosen the hose clamp on the blasting hose and pull the hose off of the connector. 2. Unscrew the air hose from the manifold.
- Page 5 INSTRUCTIONS FOR USE 1. Before blasting ensure both valves on the manifold are in the closed position. 2. See the CPSB100 or CPSB200 manual for correct operating procedures. 3. Open the lower soda metering valve (B). 4. If the sandblaster gets clogged up, close the lower soda metering valve (B) and open the exhaust valve (A), only open for a short time and ensure the hose is directed into a container or away from people and the...
- Page 6 ALSO AVAILABLE FROM YOUR CLARKE DEALER PRESSURISED SANDBLASTER CPSB100 CPSB200 • Heavy duty steel construction • Heavy duty steel construction • Removes surface rust, paint, • Removes surface rust, paint, dirt/grease etc. dirt/grease etc. • Pressurised design gives greater • Pressurised design gives...
- Page 7 SODA GRIT MODEL NO. DESCRIPTION PART NO. Soda Blast Abrasive - Coarse (7.5kg) 3052805 Soda Blast Abrasive - Coarse (22kg) 3052800 OTHER ABRASIVES AVAILABLE FROM CLARKE MODEL NO. DESCRIPTION PART NO. AOP60 60 Grit Aluminium Oxide Abrasive (22kg) 3052070 AOP80...
Need help?
Do you have a question about the CSBCT and is the answer not in the manual?
Questions and answers