Operation - ICP DAS USA PET-AR400 User Manual

3. Operation

After connected to the network, PET-AR400 can be remotely accessed and configured through
software and website from anywhere.
However, only one user is allowed to connect and get data at a time.
There are two acquisition modes and two A/D trigger modes of sampling IEPE input operation.
The following table shows the acquisition and trigger modes for each combination and their
frequency.
Acquisition
Trigger
Continuous
N-Sample
Tips & Warnings
The data in the table above was tested on the local network.
Users need to consider the computer and network conditions when operating.
PET-AR400 User Manual
Software trigger
1k ~ 42.666kHz@ four channels
1k ~ 42.666kHz@ three
channels
1k ~ 85.333kHz@ two channels
1k ~ 128kHz@one channel
--
V1.0.0
Analog threshold trigger
--
1k ~ 42.666kHz@ four channels
1k ~ 42.666kHz@ three channels
1k ~ 85.333kHz@ two channels
1k ~ 128kHz@one channel
Top P.25