Table of Contents
Advertisement
2.1. Mounting the PET-AR400
PET-AR400 has simple rail clips for mounting reliably on a standard 35 mm DIN rail.
Tips & Warnings
A good ground reference (earth ground) is essential for proper operation of the
PET-AR400. One side of all control circuits, power circuits and the ground lead
must be properly connected to earth ground by either installing a ground rod in
close proximity to the enclosure or by connecting to the incoming power system
ground. There must be a single-point ground (i.e. copper bus bar) for all devices
in the enclosure that require an earth ground.
PET-AR400 User Manual
V1.0.0
Top
P.18
Advertisement
Table of Contents
