Commissioning the device
If you want to operate the device exclusively as monitor, you do not need to commission the
device. If you want to use the IPC Wizard functions (Page 53), you do need to commission
the device.
Prerequisites
● The Flat Panel is connected to the power supply.
● The Flat Panel is linked to a SIMATIC IPC or PC by means of a DVI or DisplayPort line.
● The PC is equipped with a CD/DVD drive.
● The USB keyboard and USB mouse are connected to the PC.
● One of the supported operating systems is installed on the PC, see Preface (Page 3).
Procedure
1. Turn on the Flat Panel.
2. Turn on the PC.
3. Place the supplied "Documentation and Drivers" CD/DVD into the CD/DVD drive of the
4. Start installation of the SIMATIC IPC Wizard from the "Documentation and Drivers"
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA
PC.
CD/DVD with "\Drivers\IPC_WIZARD\setup.exe".
4
45