Parking; Moving The Unit With The Engine Off; For Best Performance - Gravely Pro-Turn 100 Operator's Manual

8. To disengage the mower, move the PTO
switch to the "Off" position.
9. When you know how to operate the unit,
select a speed appropriate to your
mowing conditions.

PARKING

To park the unit:
1. Bring the steering levers to neutral. Turn
off PTO.
2. Move the throttle lever to the "Slow"
position.
3. Engage the parking brake.
4. Lower the attachment.
5. Turn the ignition key to the "Off" position
and remove the key.
MOVING THE UNIT WITH THE
ENGINE OFF
(Figure 6)
IMPORTANT: Never tow unit.
1. Shut OFF engine.
2. Place seat in the service position (see
Service Position on page 23).
3. Pull the right and left bypass levers to
the neutral position.
WARNING: Do not bypass
transmission when on a slope.
4. Disengage parking brake.
5. Push unit to desired location.
6. Engage parking brake.
7. Push the right and left bypass levers to
the drive position.
Drive Position

FOR BEST PERFORMANCE

Cut grass when it is dry.
Keep mower blades sharp.
Keep mower deck properly leveled.
Adjust anti-scalp rollers to prevent scalping.
Do not set height of cut too low. For very tall
grass, mow twice.
Do not travel too fast.
Mow with the engine set at full throttle.
When mulching, only remove 1/3 of grass
length per cutting. Do not cut more than
2.5 cm (1") at any one time.
Discharge clippings into areas already cut.
Vary cutting pattern with each mowing.
Do not allow grass or debris to collect inside
of mower deck. Clean after each use.
EN - 20
Neutral Position
Figure 6