Related Manuals for Gravely 892051
Summary of Contents for Gravely 892051
- Page 1 3-Bag Bagger Operator’s Manual Manuel de I’utilisateur Model 892051 – 3-Bag Bagger (SN 000101 +) ENGLISH • 04990200A 2/16 FRANÇAIS Printed in USA...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WELCOME ..... . 1 SAFETY......2 Practices &... -
Page 3: Welcome
WELCOME Congratulations on your purchase and welcome to the Gravely family! Every machine in the Gravely lineup is designed for long-lasting and unsurpassed performance. We are confident your machine will be part of your family for many years to come. -
Page 4: Safety
SAFETY ALERT SYMBOL SAFETY This is the safety alert symbol. It Read these safety rules and follow them means: closely. Failure to follow these rules could • ATTENTION! lead to loss of control of unit, severe personal • YOUR SAFETY IS injury or death to you or bystanders, or result INVOLVED! in damage to property or the unit. -
Page 5: Safety Decals
SAFETY DECALS Always replace missing or damaged safety decals. Replacement decal information is in The safety decals on your unit are visual the parts manual for your unit. Decals can be reminders of the important safety information ordered from your dealer. in this manual. -
Page 6: Safety Rules
Be sure the area is clear of bystanders and 3. WARNING pets before operating. Stop machine if anyone enters the area. Use hearing protection Improper use of power equipment can cause when operating this serous permanent injury or death to the equipment. - Page 7 NEVER carry children, even with the Inspect unit before each use for missing or blade(s) shut off. They may fall off and be damaged decals and shields, correctly seriously injured or interfere with safe operating safety interlock system, and machine operation. Children who have been deterioration of grass catchers.
- Page 8 DO NOT operate machine without the entire Watch for traffic when operating near or grass catcher, discharge guard, or other crossing roadways. safety devices in place and working. Clear the area of objects such as rocks, ALWAYS keep hands and feet away from all wire, toys, etc., which could be thrown by the pinch points.
- Page 9 DO NOT try to stabilize the machine by DO NOT wear a seat belt while operating putting your foot on the ground. the unit with the center bar in the lowered position. DO NOT park on slopes unless necessary. When parking on slope ALWAYS chock or DO NOT weld, cut, drill or modify ROPS in block wheels.
- Page 10 Transporting Unit Use extra care when loading or unloading the machine into a trailer. Secure unit chassis to transport vehicle. Never secure from rods or linkages that could be damaged. DO NOT transport machine while engine is running. ALWAYS turn off power to attachment and shut off fuel when transporting unit.
-
Page 11: Assembly
Item Description Qty Part Number ASSEMBLY 5/16-18 x 3/4" 06220800 Round Head WARNING: AVOID INJURY. Square Neck Read and understand entire Bolt Safety section before 5/16-18 x 1" 06200007 proceeding. Round Head Square Neck Remove contents from carton carefully. Place bagger hood and frame parts on cardboard to Bolt help prevent scratches. -
Page 12: Remove Bumper & Heat Shield Assembly
REMOVE BUMPER & HEAT Heat Shield SHIELD ASSEMBLY 1. Remove two hex bolts, three washers, and two nyloc nuts from each corner of bumper. Retain hex bolts and small washers. Discard nyloc nuts and large washer. See Figure 4. Bumper Figure 6 INSTALL BAGGER MOUNTS, BUMPER &... -
Page 13: Assemble Bagger
4. Install left bagger arm (Item 4) onto bagger post (Item 2) with two hex bolts (Item 10) and two top locking nuts (Item 11). Do not tighten. Repeat on right bagger arm (Item 3). See Figure 10. Figure 8 3. -
Page 14: Install V-Belt
INSTALL V-BELT WARNING: AVOID INJURY. 1. Place blower belt tensioner in released Ensure that both left and right position. latches are securely locked in 2. Install V-belt around split pulley on blower position. assembly (Item 6) so that back side of belt contacts idler pulley. -
Page 15: Install Blower Assembly
Figure 16 INSTALL BLOWER ASSEMBLY CAUTION: Ensure blower assembly covers the discharge Figure 18 chute opening. INSTALL V-BELT ON DOUBLE NOTICE: Install baffle before installing blower PULLEY assembly. See Installation Kits on page 17. NOTICE: Units with 72" decks require 1. -
Page 16: Install Hose
INSTALL HOSE See Figure 20. 1. Place mower deck in lowest position. 2. Install one end of hose (Item 5) onto hose adapter. 3. Install opposite end of hose onto bagger assembly (Item 1). NOTICE: Hose must remain secured at all mower deck heights. -
Page 17: Operation
See Installation Kits on page 17. BEFORE EACH USE 1. Check bagger parts for wear damage. Replace ONLY with Gravely original Figure 23 service parts before operating. 2. Ensure counterweights are installed. 3. Route the rope through the left bagger 3. -
Page 18: Unclogging Bagger
UNCLOGGING BAGGER OPERATING TIPS • Cut grass when it is dry. WARNING: MOVING PARTS • Cut grass in two passes when cutting thick, can cut or amputate body parts. long, or wet grass. Make the first cut higher NEVER attempt to clear blower than desired. -
Page 19: Maintenance
MAINTENANCE SERVICE & ADJUSTMENTS WARNING: AVOID INJURY. WARNING: AVOID INJURY. Read and understand entire Read and understand entire Safety section before Safety section before proceeding. proceeding. MAINTENANCE SCHEDULE ADJUST BELT TENSION See Figure 26. To increase belt tension add washers to the compression spring. -
Page 20: Troubleshooting
Bagger on page 16. Blower stops or slows. Worn or damaged V-belt. Replace V-belt. See Replacing V-Belt on page 17. SPECIFICATIONS Model Number 892051 Description 3-Bag Bagger Added Length to Unit – cm (in) 68.6 (27) .42 (14.9) Bagger Capacity – m Added Width to Mower Deck –... -
Page 21: Warranty
Equipment Limited Warranty Warranty Ariens Company (Ariens) warrants to the original purchaser that Ariens, Gravely and Countax brand products purchased on or after 9/1/2015 and designated or labeled commercial products by Ariens Company will be free from defects in material and workmanship for the time period noted in the chart below. - Page 22 Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this warranty and may void the warranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this warranty.
- Page 23 • Products are designed to the specifications in the area that the product was originally distributed. Different areas may have significantly different legal and design requirements. This warranty is limited to the requirements in the area in which the unit was originally distributed.
- Page 24 655 West Ryan Street Brillion, WI 54110 gravelymower.com gravely.custhelp.com...