Use only Gravely replacement parts. The replacement of Numbers are located on the product registration form in any part on this unit with anything other than a Gravely the unit literature package. They are printed on a serial authorized replacement part may adversely affect the number label, located on the frame of your unit.
3. Review control functions and operation of the unit. DISCLAIMER Do not operate the unit unless all controls function Gravely reserves the right to discontinue, change, and as described in this manual. improve its products at any time without notice or 4.
Page 4
1. WARNING! 4. CAUTION Stop engine and wait for all moving parts to • Bag is subject to wear and deterioration. stop before opening cover. • Check bag frequently, replace when necessary. • Use original bag to comply with safety OTt2080 specifications.
Page 5
Keep area of operation clear of all toys, pets, and debris. ALWAYS disengage PTO, stop unit and engine, remove Thrown objects can cause injury. key, engage parking brake and allow moving parts to stop before leaving operator’s position. Check for weak spots on docks, ramps or floors. Stay alert for hidden hazards.
Check bags and bagger parts prior to each use for any ALWAYS lower cutting mower deck when unit is parked holes, abrasions, mildew, or structural damage. Replace or stored. parts when necessary. Use only attachments or accessories designed for your Keep all hardware properly tightened.
Page 8
NOTE: User may need to remove (2) tapping screws and 1. Raise the rear of the unit and support it securely on jack stands. Gravely backing plate. 2. Remove original rear bumper by removing four 2. Fasten the weight plates (item 6) to the...
Page 9
ASSEMBLE CATCHER (FIGURE 7) ATTACH CATCHER TO LOWER MOUNT (FIGURE 8) 1. Attach inlet adapter (item 1) onto receptacle assembly (item 2) with (4) 5/16-18 x 3/4 hex bolts 1. Secure 3/8-16 x 1 3/4 round head square neck bolts (item 10) and 5/16-18 nyloc nut (item 18).
Page 10
INSTALL BLOWER ASSEMBLY (FIGURE 9) INSTALL V-BELT ON BLOWER ASSEMBLY (FIGURE 11 AND FIGURE 12) Install Front Baffle to Blower Assembly There are three V-belts included in the bagger kit with a 1. Choose the appropriate baffle and install to blower part number on each V-belt: assembly according to Figure 9.
Page 11
INSTALL V-BELT ON DOUBLE PULLEY INSTALL HOSE (FIGURE 13) (FIGURE 12) IMPORTANT: Ensure the flat side of V-belt contacts idler pulley and the V-side of V-belt contacts drive pulley and double pulley. 1. Remove the hex bolts holding the right hand belt cover.
WARNING: Lower attachment, stop engine, and 1. Check bagger parts for wear, deterioration or remove key to prevent unauthorized use. DO damage. Replace ONLY with Gravely original NOT park on slopes. service parts before operating. 2. Make sure counterweights are installed.
Page 13
EMPTYING MESH BAGS UNCLOGGING BAGGER If bagger stops picking up grass clippings, mesh bags WARNING: MOVING PARTS can cut or may be full. amputate body parts. To empty bags: NEVER attempt to clear blower assembly while 1. Disengage PTO, stop engine and remove ignition engine is running.
MAINTENANCE REPLACING V-BELT (FIGURE 15) Gravely Dealers will provide any service or adjustments which may be required to keep your unit operating at 1. Remove belt cover. peak efficiency. 2. Disengage belt tensioner. WARNING: AVOID INJURY. Read and 3. Remove belt from double pulley.
Blower Assembly stops 1. Worn or damaged V-belt. 1. See Replacing V-Belt (Figure 15) on or slows. page 14. SPECIFICATIONS Model Number 891006 Description Bagger, Rear 2-Bag Added Length to Unit 25.50" Bagger Capacity 8 Bushels Added Width to Mower...
Page 19
BAGGER RECEPTACLE ASSEMBLY (CONTINUED) Item Part No. Qty. Description 00458901 2-Bag Fabric Cover with J-Strip 00458902 Air Dome Frame .38 Rod 05946800 Bolt, Hex .25-20 x .75 06308400 Washer, Locking .25 x .062 06437300 Washer, Flat Steel .281 x .62 x .065 00458903 Bracket, Mount Single Hole 00458904...
Page 20
BLOWER HOUSING ASSEMBLY BOM ID Number Qty Description BOM ID Number Qty Description 00168100 BRKT, ADJUSTABLE IDLER 06224100 BLT-RDHDSQNK .38-16 X 1.25 00451953 COVER, BLOWER -BLACK 06433600 WSHR-FL-NYL .375 X .75 X .060 00452200 ADAPTER, HOSE 06436200 WSHR-FL-STL.406 X .812 X .065 00474251 LINK, IDLER RELEASE-BLACK 06439100...
Page 21
MOUNTING ASSEMBLY 60" 52" 48" BOM ID Number Qty Description BOM ID Number Qty Description 04590651 WLDMT, 48" FRONT BLOWER BAFFLE-BLACK 06223800 BLT-RDHDSQNK .38-16X1.75 GBYZ 00186400 BSHG, SPCR .41 X .75 X .88 PM 06224300 BLT-RDHDSQNK .38-16X2.00 GR5 00458900 HUMBOLT 2-BAG (8BU) RECEPTACLE 06306500 WSHR-LK .38X.115 HVY YWZC 00610751...
Commercial Mowing Equipment Limited Warranty Ariens Company (Ariens) warrants to the original purchaser that Ariens, Gravely and Countax brand products purchased on or after 1/1/2012 and designated or labeled commercial products by Ariens Company will be free from defects in material and workmanship for the time period noted in the chart below.
Page 23
Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this warranty and may void the war- ranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this warranty.
Page 24
GRAVELY 655 West Ryan Street Brillion, WI 54110 920-756-4688 Fax 920-756-2407 www.gravely.com...
Need help?
Do you have a question about the 891006 and is the answer not in the manual?
Questions and answers