Page 1
2-Bag Bagger Operator’s Manual Manuel de I’utilisateur Model 891007 – 2-Bag Bagger (SN 000101 +) ENGLISH • 05106500A 1/17 FRANÇAIS Printed in USA...
WELCOME Congratulations on your purchase and welcome to the Gravely family! Every machine in the Gravely lineup is designed for long-lasting and unsurpassed performance. We are confident your machine will be part of your family for many years to come.
SAFETY ALERT SYMBOL SAFETY This is the safety alert symbol. It Read these safety rules and follow them means: closely. Failure to follow these rules could • ATTENTION! lead to loss of control of unit, severe personal • YOUR SAFETY IS injury or death to you or bystanders, or result INVOLVED! in damage to property or the unit.
SAFETY DECALS Always replace missing or damaged safety decals. Replacement decal information is in The safety decals on your unit are visual the parts manual for your unit. Decals can be reminders of the important safety information ordered from your dealer. in this manual.
Page 6
Safety Decal Descriptions 4. IMPORTANT Hoses are subject to normal 1. DANGER wear and deterioration. To avoid serious injury DO Check hoses frequently and NOT operate mower unless if they become defective, guards are in place or grass install new hoses. pump and entire bagger are For best collection results, attached.
SAFETY RULES Children The following safety instructions are based Tragic accidents can occur if the operator is on the B71.4 specifications of the American not alert to the presence of children. National Standards Institute and ISO 5395 in Children are often attracted to the machine effect at the time of production.
Page 8
Under normal usage the bag material is This product is equipped with an internal subject to deterioration and wear. Check combustion type engine. DO NOT use unit frequently for wear and damage and replace on or near any unimproved, forest-covered if necessary.
Page 9
Never leave a running machine unattended. Keep all movements on the slope slow and Always turn off blade(s), set parking brake, gradual. Do not make sudden changes in stop engine and remove key before speed or direction, which could cause the dismounting.
Page 10
Check grass catcher components and the NEVER make adjustments or repairs with discharge guard frequently and replace with the engine running. manufacturer’s recommended parts, when Mower blades are sharp. Wrap the blade or necessary. wear gloves, and use extra caution when Use only Ariens Company-recommended servicing them.
Item Description Qty Part Number ASSEMBLY 1/2-13 x 2 1/4” 05961000 Hex Bolt WARNING: AVOID INJURY. 1/2-13 x 1" Hex 05947100 Read and understand entire Bolt Safety section before proceeding. 5/16-18 x 2 1/2” 05952600 Hex Bolt Remove contents from carton carefully. Place 11/32 x 11/16”...
INSTALL BAGGER MOUNTS CAUTION: Deck-specific bagger installation kit is required to install and operate bagger. See Installation Kits on page 19. 1. Remove and discard four hex bolts, four washers, and four nyloc nuts from rear bumper mounts. See Figure 4. Figure 5 4.
ASSEMBLE BAGGER See Figure 7. 1. Install hex bolt (Item 10) into the right rollover protection structure (ROPS) bracket with a spin lock flange nut (Item 12) in the center of the bracket. 2. Secure hex bolt with a flat steel washer (Item 13), spacer (Item 11) and top lock flange nut (Item 9).
Figure 12 INSTALL V-BELT Figure 10 1. Place blower belt tensioner in released 7. If necessary for clearance, loosen the position. tapping screw and rotate the ROPS 2. Install V-belt around split pulley on blower lanyard clip. See Figure 11. assembly (Item 6) so that back side of belt contacts idler pulley.
IMPORTANT: Ensure flat side of V-belt contacts idler pulley and the V-side of V-belt contacts split pulley as shown in Figure 14. Split Pulley Figure 15 INSTALL BLOWER ASSEMBLY CAUTION: Ensure blower Idler Pulley assembly covers the discharge chute opening. Figure 14 NOTICE: Install baffle before installing blower Belt must be correctly adjusted for blower to...
3. Install blower assembly on mower deck. Belt Cover Install pin through bracket on mower deck. See Figure 17. Tensioner Wing Knobs V-belt or Hex Bolts Figure 18 Figure 17 4. Place blower belt tensioner in operating INSTALL V-BELT ON DOUBLE position.
INSTALL ROPE 1. Route one end of rope through hole in left bagger arm and tie a knot to secure. See Figure 21. Hose Adapter Figure 19 INSTALL BAGS 1. Release bagger cover latch straps. 2. Lift bagger cover up to access bagger Figure 21 frame.
BEFORE EACH USE blades or impeller. 1. Check bagger parts for wear damage. Replace ONLY with Gravely original service parts before operating. WARNING: PINCH POINT! Use 2. Ensure counterweights are installed. extreme caution when unclogging blower assembly.
If hose or blower assembly clogs, stop REMOVAL forward motion and allow unit to clear itself. If unit will not clear itself, unclog the hose CAUTION: Bagger assembly and/or blower assembly manually as will rotate backward when latch instructed below. is released.
MAINTENANCE SERVICE & ADJUSTMENTS WARNING: AVOID INJURY. WARNING: AVOID INJURY. Read and understand entire Read and understand entire Safety section before Safety section before proceeding. proceeding. MAINTENANCE SCHEDULE ADJUST BELT TENSION See Figure 25. To increase belt tension add washers to the compression spring.
16. Blower stops or slows. Worn or damaged V-Belt. Replace V-belt. See Replacing V-Belt on page 18. SPECIFICATIONS Model Number 891007 Description 2-Bag Bagger Added Length to Unit – cm (in) 66.1 (26) 23.6 (9.3) Bagger Capacity – m Added Width to Mower Deck –...
Equipment Limited Warranty Warranty Ariens Company (Ariens) warrants to the original purchaser that Ariens, Gravely and Countax brand products purchased on or after 9/1/2016 and designated or labeled commercial products by Ariens Company will be free from defects in material and workmanship for the time period noted in the chart below.
Page 23
Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this warranty and may void the warranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this warranty.
Page 24
• Products are designed to the specifications in the area that the product was originally distributed. Different areas may have significantly different legal and design requirements. This warranty is limited to the requirements in the area in which the unit was originally distributed.
Page 26
655 West Ryan Street Brillion, WI 54110 gravelymower.com gravely.custhelp.com...