MikroTik RBwAPG-5HacD2HnD Quick Manual
Hide thumbs Also See for RBwAPG-5HacD2HnD:

Advertisement

Models: RBwAPG-5HacD2HnD (wAP ac), RBwAPG-5HacD2HnD-BE (wAP ac BE)
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.3 or the latest version to ensure compliance with local authority
regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency
channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All
MikroTik radio devices must be professionally installed.
This "wAP ac" series Quick Guide covers models: RBwAPG-5HacD2HnD (wAP ac), RBwAPG-5HacD2HnD-BE (wAP
ac BE).
This is Wireless Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on
with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, brochures, and more info about products at
Configuration manual for software in your language with additional information can be found
at
https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant
https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain. This is to ensure that EIRP meets the limit set by the local
authorities. This is done in the Quickset, CPE menu.

First steps:

Make sure your Internet service provider is allowing hardware change and will issue an IP address.
Open the bottom lid.
https://mt.lv/um
for the full up-to-date user manual. Or scan the QR code
https://mikrotik.com/products

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RBwAPG-5HacD2HnD and is the answer not in the manual?

Questions and answers

Summary of Contents for MikroTik RBwAPG-5HacD2HnD

  • Page 1 Configuration manual for software in your language with additional information can be found https://mt.lv/help MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants Depending on the antenna used, you must set its gain. This is to ensure that EIRP meets the limit set by the local authorities.
  • Page 2 Safety Information:  Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
  • Page 3  the power adapter from the power outlet. Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

This manual is also suitable for:

Rbwapg-5hacd2hnd-be

Table of Contents