MikroTik hAP ac2 Quick Start Manual

EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.10 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.
This Quick Guide covers models: RBD52G-5HacD2HnD-TC (hAP ac²), RBcAPGi-5acD2nD (cAP ac), RB952Ui-5ac2nD-TC (hAP ac lite TC), RB952Ui-5ac2nD
(hAP ac lite).
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, brochures, and more info about products at
Configuration manual for software in your language with additional information can be found
If you need help with configuration, please seek a
First steps:
Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;
Connect the service provider cable to the Internet port and connect the device to the power source;
Open network connections on your computer and search for MikroTik wireless network - connect to it;
The configuration can be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox configuration
mt.lv/winbox ;
Open http://192.168.88.1 in your web browser to start configuration, user name: a
and wireless passwords on the
Click the "Check for updates" button and update RouterOS to the latest version;
For a manual update of the device, visit the products page at
the "Support&Downloads" menu;
Upload downloaded packages to the
By upgrading your RouterOS software to the latest version, you can ensure optimal performance, stability, and security updates;
In the "QuickSet" menu set up the following: Choose your country, to apply country regulation settings;
Set up your wireless network password in the left field;
Set up your router password in the bottom field.
https://mt.lv/um for the full up to date user manual. Or scan the QR code with your mobile phone.
consultant https://mikrotik.com/consultants
sticker);
https://mikrotik.com/products
WebFig or Winbox "Files"
https://mikrotik.com/products
at https://mt.lv/help
dmin
and there is no password by default
to find your product. The required packages are accessible under
menu and reboot the device;
tool https://
(or, for some models, check user