MikroTik Audience Manual

Audience
Audience
Audience - home access point for reliable network build. Easy to outspread wireless network
coverage by adding more Audience devices to it. You will be able to move with your wireless
appliance within network range and Audience devices will bond the same (SSID) with it.

Connecting

Audience by default is configured as Home AP, for simple, manageable use in-home or office, please follow these steps to set up your wireless network:
Connect your internet provider Ethernet cable to the ETH1 port.
Plug the included power adapter to start up the device (see "
The device will boot up, the front led indicator will light in solid blue, and the Wireless network will be available for connecting.
Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it.
Once connected to the wireless network, open
default, you will be logged in automatically. For mobile phones use the application (see "
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, apply country regulation settings, and set up your password on the screen that loads.
To add another Audience device to the network (see "

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
1. Scan QR code and choose your preferred OS.
2. Install and open application.
3. By default, the IP address and user name will be already entered.
4. Click Connect to establish a connection to your device through a wireless network.
5. Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
6. An advanced menu is available to fully configure all necessary settings.

Powering

The device accepts power from the power jack or from the Ethernet port:
Provided direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC .
Powering ").
https://192.168.88.1 in your web browser to start configuration, since there is no password by
WPS Sync button ").
MikroTik mobile app ").