Table of Contents
Advertisement
7
Automatic and manual mode
In manual mode, the force gauge moves by pressing the arrow key for the direction of travel. In
automatic mode, this is initiated via a keystroke. The force gauge stops as soon as it receives a
stop commans, for example by pressing a key or from the limit switch.
8
Set travel distance
For the travel distance, both the upper and the lower limit can be set individually. When the slide
reaches the limit, the motor stops directly.
9
Establish connection with a force gauge
To establish a connection with a force gauge of the PCE-PGF series, use the pulse cable included
in the delivery. As soon as a pulse is sent from the force gauge, the force test stand stops. All
settings for this can be found in the PCE-PFG series manual.
10
Contact
If you have any questions, suggestions or technical problems, please do not hesitate to contact
us. You will find the relevant contact information at the end of this user manual.
11
Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
© PCE Instruments
6
Advertisement
Table of Contents
