Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
45 x 26 x 68 cm / 17.7 x 10.2 x 26.7" Weight 35 kg / 77 lb Scope of delivery 1 x motorised tension-compression test stand PCE-VTS 50 or PCE-HTS 50 1 x pulse cable for PCE-PFG series 4 x rubber foot 2 x Allen key...
Switch between manual and automatic mode Stop automatic mode Start upward travel (PCE-VTS 50) or travel to the left (PCE-HTS 50) Start downward travel (PCE-VTS 50) or travel to the right (PCE-HTS 50) Switch to low speed (1 ... 99 mm/min) Switch to full speed range Switch to high speed (100 ...