Maintenance Functions; Figure 37: Save Log Data Dialog Box - NorthStar 961 Install Manual

SECTION FOUR - Service/Maintenance

Maintenance functions

Cleaning the 961/
962
Page 68
Saving log data
Occasionally, the 961/962 may have a problem that requires looking at its
log files to determine the cause. If this happens, you'll be prompted to
save the 961/962's log files, which should then be sent to the Northstar
Service Department. If you have any questions, call Northstar and ask to
speak with a marine service technician.
To save the log files:
1. Press the key until you reach the
press the
2. At the
The SAVE LOG DATA dialog box appears.
3. Insert the disk into the drive (either a floppy disk or a Zip disk), then
press the
asking you to wait while the 961/962 saves the log data. This dialog
box is followed by the SUMMARY OF LOG DATA dialog box, showing
the number of log files saved.
4. Press the
screen.
To clean the control head's glass lens, use a commercially available glass
cleaner. Periodically dust the processor, especially around its floppy or zip
drive and CD-ROM drive.
key.
screen, press the

Figure 37: Save log data dialog box

key. The SAVING LOG DATA dialog box appears,
key to return to the DATABASE FUNCTION
961/962 INSTALLATION MANUAL Revision A
screen, then
key.