Related Manuals for Parker Hi-Pro Manifold
Summary of Contents for Parker Hi-Pro Manifold
- Page 1 Effective: July 2018 Hi-Pro Manifold Effective: December 2022 Installation and Operation Manual Hi-Pro Manifold...
-
Page 2: Identification Of Hazards
Wear suitable PPE before installation and follow appropriate site safety procedures. Before installation, ensure that all valves are in the closed position. Parker Hi-Pro manifold uses either integral fitting (A-LOK/CPI) or NPT female connections. For connection, please refer to the appropriate installation instruction. -
Page 3: Operation
For anti-tamper designs only use the correct key for Parker manifolds. MAINTENANCE Parker Hi-Pro Manifolds are not user-serviceable, except for gland adjustment of the vent needle valve. Gland adjustment becomes necessary when the valve is visibly leaking through the spindle just below the operating handle, or prior to operation when no torque or resistance is evident when operating the valve handle. - Page 4 Page 3 of 6 ECO-0251996 ISSUE: 01 Installation and Operation Manual Hi-Pro Manifold HANDLE GLAND NUT GLAND LOCK H-Series Bonnet...
- Page 5 ISSUE: 01 Installation and Operation Manual Hi-Pro Manifold These valves are primarily used for double isolation of an instrument, be that a gauge or a transmitter. The primary and secondary valves are in the open position during normal operating conditions allowing the process pressure to enter the gauge or transmitter to perform its function to give a pressure reading.
- Page 6 Page 5 of 6 ECO-0251996 ISSUE: 01 Installation and Operation Manual Hi-Pro Manifold 3. Close the secondary valve. The double block gives two isolations to prevent process media escaping. 4. Close the vent valve. 5. Perform the required downstream functions.
- Page 7 Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.