RMLT94xx
Setting up winter position
Set up the winter position if you are not using the refrigerator for a longer period:
a
➤ Release the locking hooks of the door lock by pulling them out and folding them
inwards (fig. a). When the door is then closed, there is a wide gap. This pre-
vents mould from forming.
➤ Remove the batteries from the battery compartment.
b
2.
Open the door in winter position as follows (fig. b):
➤ Press very gently on the door so that the door fits on the looking hook of the door
lock.
➤ Pull the door handle towards you without opening the door.
A
NOTICE!
If you open the door at the same time as you operate the handle, the
looking hook of the door lock will be damaged.
➤ Open the door.
EN
1.
Using the refrigerator
3.
21