Nortel SCS User Manual page 33

The Test Slave Certificate screen appears.
Before you proceed, you must install the Certificate. Return to the Master System console, and perform the following steps to install
the certificate on the Slave System.
13 On the Master System, enter the following command to change to the certificate directory:
cd sipx-certdb/
Press Enter.
14 To copy the certificate from the Master to the Slave, enter the following command but replace the example domain name with your
domain name:
/usr/bin/ssl-cert/install-cert.sh --remote scs2.business.com
Press Enter.
You are prompted to connect to the Slave System.
15 Type YES to connect, and press Enter.
You are prompted to enter the root password on the Slave System.
16 Enter the root password, and press Enter.
17 The certificate will copy from the Master to the Slave and will notify you of successful configuration.
18 Return to the Slave Sytem console and test the certificate installation; use Tab to highlight Test Certificate (or use your mouse), and
press Enter. You can also use Tab to highlight Install Later (or use your mouse), and press Enter to select this option and defer
2007 Nortel Software Communication System v1.0
HA System installation
Page 21