Nortel SCS User Manual page 28

Installing a new Software Communication System
Tab to highlight OK (or use your mouse), and press Enter.
9 Set the system clock date and time; use Tab or your mouse to navigate among lines and the up and down arrows keys to change
the numeric values. After you enter all information, press Tab to highlight OK (or use your mouse), and press Enter.
The information you entered is used to automatically configure SCS, after which you can reboot or return to a command prompt.
10 If you are ready to use SCS, you must reboot the system. Use Tab or your mouse to highlight Reboot, and then press Enter.
11 After rebooting, you can enter your SCS domain name (for example, scs.business.com) into a Web browser and start to configure
your PBX.
Page 16 Software Communication System v1.0 2007 Nortel