Nortel SCS User Manual page 26

Installing a new Software Communication System
all information, press Tab to highlight OK (or use your mouse), and press Enter.
3 In the Slave Network Settings dialog box, enter the requested information; use Tab or your mouse to navigate among lines. After
you enter all information, press Tab to highlight OK (or use your mouse), and press Enter.
4 Enter a new password for the root logon; use Tab or your mouse to navigate among lines. After you enter all information, press Tab
to highlight OK (or use your mouse), and press Enter.
5 Select the time zone or continent in which you reside and then press Enter. If you select the time zone in this step, skip to step 7. If
you select the continent, proceed to step 6. The following time zone codes are represented:
• EST5EDT: Eastern Time Zone
Page 14 Software Communication System v1.0 2007 Nortel