Supermicro X13SEW-TF User Manual page 87

Equalization Bypass to Highest Rate
Enable this feature to bypass the equalization of intermediate data rates. This will reduce
the time for link training in PCIe 5.0 devices. The options are Disable and Enable.
IIO eDPC Support
Use this feature to enable or disable IIO enhanced DPC (eDPC) support. The options
are Disable, On Fatal Error, and On Fatal and Non-Fatal Errors.
IIO eDPC Interrupt (Available if "IIO eDPC Support" is set to On Fatal Error or
On Fatal and Non-Fatal Errors)
Use this feature to enable or disable IIO enhanced DPC (eDPC) interrupt. The options
are Disable and Enable.
IIO eDPC ERR_COR Message (Available if "IIO eDPC Support" is set to On Fatal
Error or On Fatal and Non-Fatal Errors)
Use this feature to enable or disable IIO enhanced DPC (eDPC) error correction mes-
sage. The options are Disable and Enable.
South Bridge
The following USB information is displayed:
•
USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy
support if there are no legacy USB devices present. Select Disabled to have all USB
devices available for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support Extensible Host
Controller Interface (XHCI) hand-off. The XHCI ownership change should be claimed by
the XHCI driver. The options are Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, provides complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
PCIe PLL SSC
Select Enabled for PCH PCIe Spread Spectrum Clocking support. This feature allows the
BIOS to monitor and attempt to reduce the level of electromagnetic interference caused by
the components whenever needed. The options are Disabled and Enabled.
87
Chapter 4: UEFI BIOS