Supermicro X13SEW-TF User Manual page 55

LAN Port Enable/Disable
Use JPL1 to enable or disable the I210 LAN1 port (for X13SEW-F). Use JPL2 to enable or
disable the I210 LAN2 port (for X13SEW-F). Use JPL3 to enable or disable the X550 LAN1 and
LAN2 ports (for X13SEW-TF). The default setting is Enabled.
ME Manufacturing Mode
Close pins 2-3 of jumper JPME1 to bypass SPI flash security and force the system to operate
in the manufacturing mode, which will allow the user to flash the system firmware from a host
server for system setting modifications. Refer to the table below for jumper settings. The default
setting is Normal.
JUIDB1
VGA
MH1
BMC
BT1
4 3
M.2 NVME
JBT1
M.2-P
CMOS CLEAR
MH15
MH6 BIOS LICENSE
MH9
MH10
FAN6 FAN5 FAN4 FAN3
LAN Port Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacturing Mode
COM1
MH2
USB3/4
(3.2 Gen 1)
LAN2 LAN1
IPMI_LAN
USB0/1
2 1
JNCSI1
JPFR2
JTPM X550
MH4 MH17
USB2
PCH
C741 JRK1
MAC CODE
SAN MAC
JVRM1
CPU
JPI2C
MH8
FAN2 FAN1
MH7
1. JPL1
2. JPL2
3. JPL3
4. ME Manufacturing Mode
55
Chapter 2: Installation