Dimm Installation; Dimm Removal - Supermicro X13SEW-TF User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMA1, DIMMB1, DIMMC1,
DIMMD1, DIMME1, DIMMF1, DIMMG1,
DIMMH1, and insert the desired number of
DIMMs into the memory slots based on the
Recommended Memory Population Guide
table on page 33.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Push both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
JUIDB1
VGA
MH1
BMC
BT1
CMOS CLEAR
MH15
MH6
MH9
MH10
FAN6 FAN5 FAN4 FAN3
Release Tabs
Push both ends
straight down into
the memory slot.
35
Chapter 2: Installation
COM1
MH2
USB3/4
(3.2 Gen 1)
LAN2 LAN1
IPMI_LAN
USB0/1
JNCSI1
JPFR2
JTPM X550
MH4 MH17
M.2 NVME
JBT1
M.2-P
USB2
PCH
C741 JRK1
MAC CODE
SAN MAC
BIOS LICENSE
JVRM1
CPU
JPI2C
MH8
FAN2 FAN1
MH7
Notches