Tao Motor Cheetah Owner's Manual page 23

7) VERY IMPORTANT DO NOT SKIP THIS STEP!!!
IF you do not have the proper battery charger to charge the battery at slow 3amps
then you will need to take the battery to your local auto parts store or motorcycle
dealer and request they charge it for you at no more than 3amps. Newly activated
batteries require an initial charge. After adding electrolyte, a new battery is
approximately 75-80% charged. After the "stand" period described in step 6, charge the
battery to bring it to a full state-of-charge. The battery charger used for initial charging
should be able to charge at a slow no more than 3 amps for a motorcycle battery. All
Yuasa battery chargers are capable of reaching this minimum voltage and
initializing/activating an AGM battery.
** When installing the battery into the vehicle (under the seat) make sure the wires are attached
CORRECTLY!! **
Red (positive) to the plus + of the battery
Black (negative) to the minus - on the battery
Next secure the battery by strapping it down.
23