The 7-Step Process To Activate An Atv Battery - Tao Motor Cheetah Owner's Manual

The 7-Step Process to Activate an ATV Battery

1) The battery must be out of the vehicle and sitting on a level surface.
2) Remove the electrolyte container from the plastic storage bag. Remove the strip of caps
and set it aside as it will be necessary later in this process. When filling your Motorcycle
battery use only the dedicated acid container that comes with the battery as it contains
the proper amount of electrolyte. This is important to service life and battery
performance. Do not pierce or otherwise open the foil seals on the electrolyte container.
Do not attempt to separate the individual electrolyte containers.
3) Place the electrolyte container with the foil seals face-down into the cell filler ports on the
battery. Hold the container level and push down to break the foil seals. Electrolyte will
start to flow into the battery and air bubbles will be seen inside the container.
Do not tilt the electrolyte container.
21